01794 367 038
Call us now
OGM Ltd
Three Component Self-Smoothing Coloured Epoxy Resin

OGM Ltd, an Injection Moulding Manufacturer based in Oxford, were moving to larger newer premises. Previous ocupiers had left the factory floor in very poor condition with a multitude of different finishes from latex, adhesive and tiles to badly applied resins. All of these had to be removed with some of our largest preparation equipment before new resin applications could be applied that would cope with the busy and heavy manufacturing process.

 

Lorry mounted, vacuum enclosed blasting equipment were used to remove all previous applications and prepare the substrate.

 

Two applications of moisture tolerant epoxy primers were used to seal the newly prepared substrate before a 3mm trowel applied application of self smoothing epoxy resin was applied to the total area.

 

Coloured walkways were applied over the top of the resin. These were incorporated with a fine quartz aggregate to achieve a slip resistant finish.

 

All existing expansion joints were then cut back through the coloured coatings and reinstated with a polysulphide joint compound.

 

Resin System
Three Component Self-Smoothing Coloured Epoxy Resin
Client
OGM Ltd
Location
Oxford
Area
2500m2
Installation
8 Days